JCM 414 Mechanical Joint Fabricated Tapping Sleeve
The JCM 414 Fabricated Mechanical Joint Tapping Sleeve is recommended for taps on pipe that will not accommodate a direct top seal tapping sleeve. The 414 utilizes a true mechanical joint sleeve design that completely encompasses the tap area, eliminating any potential leaks due to pipe cracks or breaks. Side gaskets are internally and externally trapped in a recessed groove machined into the bolting lug bars that completely compress the gaskets creating the watertight seal on the sides of the sleeve. The end gaskets are compressed into the sleeve housing with mechanical joint pusher glands, providing the water tight seal on the ends of the sleeve and completing the full encapsulation of the tap area.
Features of the Fabricated 414 Tapping Sleeve High Strength Steel eliminates stress cracked casting or flange possibility. Side And End Gaskets provide complete seal around the pipe. Fabricated Sleeves provide more strength with significantly reduced weight than a cast sleeve. The lighter sleeve reduces the load on the pipe and aids in installation and handling. For applications in corrosive environments, the JCM 414 is available fabricated in all stainless steel. Accommodates Non-Standard Pipe Characteristics - Oversize, undersize or irregularities in the pipe O.D. can be accommodated within the fitting increasing performance and safety factor. The JCM 414 is available in larger sizes, non-standard sizes and with many special options (special flanges, special laying lengths, etc.) Improved Availability - Fabricated sleeves with non-standard sizes have a delivery schedule of three to five weeks, significantly less than a cast sleeve’s six to nine months.
How To Order For pricing and engineering, the following information must be furnished: Type of pipe Outside diameter of pipe Irregular or non-standard pipe characteristics Line contents and pressure
Outlet Size (14” and larger, furnish manufacturer of valve and cutter size) Coating and hardware Material requirements - options Special requirements
JCM 414 Fabricated Mechanical Joint Tapping Sleeves meet or exceed ANSI/AWWA C111/A21.11 as applicable. JCM 400 Series Tapping Sleeves are ANSI/NSF Standard 61, Annex G & ANSI/NSF 372 Certified. JCM 400 Series Tapping Sleeves meet MSS-SP124 and ANSI/AWWA Standard C223 Fabricated Steel and Stainless Steel Tapping Sleeves. JCM 414 Mechanical Joint Tapping Sleeves are Priced on Application. For quotation, contact the JCM Inside Sales Team at 1-800-527-8482 or 1-903-832-2581.
65
Price List Effective February 3, 2025. Cancels all previous prices. Prices are subject to change without notice. 800.527.8482 sales@jcmindustries.com jcmindustries.com
Powered by FlippingBook