JCM Fabricated Products for Branching Fabricated steel tapping sleeves have become most popular for making taps on all types of pipe. Placing design emphasis on eliminating problems inherent with older pipe and field installations, these fabricated tapping sleeves have taken the complexity out of tapping larger pipe. Fabricated sleeves provide more flexibility and strength than cast sleeves and are not subject to breaking due to concentrated stress. Lighter weight and ease of assembly permits installation with a minimum of crew, equipment and time. For specific product information, contact JCM Industries Sales Team.
PRODUCT
NUMBER & TYPE
APPLICATION, SIZES AND INFORMATION
Most economical sleeve for dry taps and connections to be made without a valve. Also excellent as a base sleeve for special sleeves.
411 Plain Outlet
Tapping Sleeve
Available with reducing and size on size outlets for all types of pipe, 6”and larger.
412 Flanged Outlet Tapping Sleeve
The standard sleeve for quick, economical taps on various types of pipe,standard or high pressure service. Available in all types of standard or special sizes. Available with reducing and size on size outlets, pipe sizes 6” and larger. Special outlets readily available. 422 Specially designed tapping sleeve for the exact O.D. of steel pipe, IPS PVC and C900/C909. Sizes 2” -12”.
422 Flanged Outlet
Tapping Sleeve for PVC & Steel Pipe
Quick economical cross for all types of pipe 8” and larger. Outlets must be minimum of three nominal sizes smaller than run.
413 Flanged Outlet Tapping Cross
The sleeve with side and end gaskets to provide extra margin of safety on lines which are subject to problems of beam loads. Available with size on size and reducing outlets. Competitive with cast sleeves in larger and special sizes. Excellent availability.
414 Mechanical Joint Tapping Sleeve & Cross
Designed to tap the various types and brands of concrete steel cylinder pipe. Sleeve reinforces pipe prior to cutting of pipe reinforcing rod. Extra heavy retained gasket and easily installed gland provide a locked in, positive seal. Available with reducing outlets in pipe sizes 16” and larger.
415 Concrete Steel
Cylinder Tapping Sleeve
416 Weld On Outlets
Outlets, partial sleeves and complete sleeves for pipe sizes 6” and larger with size on size and reducing outlets. These outlets are designed for steel pipe with wall thickness of 1/4” and greater.
417 Weld on Tapping Sleeve
Split weld on sleeve designed to reinforce pipe to be tapped. Standard sleeve thickness 1/4”.
70
Price List Effective February 3, 2025. Cancels all previous prices. Prices are subject to change without notice. 800.527.8482 sales@jcmindustries.com jcmindustries.com
Powered by FlippingBook