Product Specification
JCM 133 All Stainless Steel Tapped Univ Clamp Couplings - sizes 2” – 8” (50 -200mm)
All full circumferential single band repair clamps 2" and larger shall have a minimum material standard of certifiable prime 304 stainless steel band; low profile CF-8 Cast Stainless Steel lugs (equivalent to 304 stainless steel) with mutually supporting sliding fingers; minimum 5/8” A193 B8 304 stainless steel, oval neck track head, replaceable bolts and nuts, and a Styrene- Butadiene Rubber (SBR) gridded gasket with tapered lap joint ends and a 304 stainless steel bridge plate molded flush into the gasket. Gaskets in sizes 3” and larger shall be 1/4” thick.
JCM 133 All Stainless Steel Tapped Univ Clamp Couplings - sizes 10” (250mm) and larger
All f ull circumferential single band repair clamps 10” and larger shall have a minimum material standard of 17 gauge certifiable prime 304 stainless steel band; heavy duty, low profile CF-8 Cast Stainless Steel lugs (equivalent to 304 stainless steel) with mutually supporting sliding fingers; minimum 3/4 ” A193 B8 304 stainless steel, oval neck track head, replaceable bolts and nuts, and a Styrene-Butadiene Rubber (SBR) gridded gasket with tapered lap joint ends and a 304 stainless steel bridge plate molded flush into the gasket. To provide extra tightening capability, the band shall be permanently attached to the lugs. The attachment shall withstand a minimum of 100 ft. lbs. of torque per bolt.
This typical specification, provided by JCM Industries, is a proposed guideline for use by specifying agencies to ensure significant design and material features of this product are included within the agencies ’ individual specifications.
www.jcmindustrialfittings.com
Effective 04.25.14
Powered by FlippingBook