JCM Industrial Fitting Typical Specifications 01 12 2024

Product Specification

JCM 134 All Stainless Steel Tapped Univ Clamp Couplings – Extended Range - sizes 4” through 8" (100-200mm)

All full circumferential multi- band repair clamps 4" through 8” shall have a minimum material standard of certifiable prime 304 stainless steel band; low profile CF-8 Cast Stainless Steel lugs (equivalent to 304 stainless steel) with mutually supporting sliding fingers, permanently welded to the band; minimum 5/8" replaceable, A193 B8 304 stainless steel oval neck track head bolts and nuts, and a Styrene-Butadiene Rubber (SBR) gridded gasket with tapered lap joint ends and a 304 stainless steel bridge plate molded flush into the gasket. Gaskets in sizes 4” and larger shall be 1/4” thick .

JCM 134 All Stainless Steel Tapped Univ Clamp Couplings – Extended Range - sizes 10" and larger (250mm)

All full circumferential multi-band repair clamps 10" and larger shall have a minimum material standard of 17 gauge certifiable prime 304 stainless steel band; heavy duty, low profile CF-8 Cast Stainless Steel lugs (equivalent to 304 stainless steel) with mutually supporting sliding fingers, permanently welded to the band; minimum 3/4" replaceable A193 B8 304 stainless steel oval neck track head bolts and nuts, and a Styrene-Butadiene Rubber (SBR) gridded gasket with tapered lap joint ends and a 304 stainless steel bridge plate molded flush into the gasket.

This typical specification, provided by JCM Industries, is a proposed guideline for use by specifying agencies to ensure significant design and material features of this product are included within the agencies ’ individual specifications.

www.jcmindustrialfittings.com

Effective 04.25.14

Powered by