Material Specifications - 201, 203, 204
MIDDLE RING: Carbon Steel per ASTM A-36 or equal. FOLLOWERS: 1/2” - 12” Ductile Iron ASTM A-536 or equal; 14” and larger: ASTM A36 BOLTS: 1/2” through 2”: ASTM A242 low alloy with yellow dichromate seal. Sizes 2-1/2” and larger: Corrosion resistant, high strength low alloy ASTM A242, A193 B5, B7. Optional A193 B8 304 stainless steel or 316 stainless steel. GASKETS : Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber. Gasket temperature range -40 o F to 212 o F (-40 o C - 100 o C) Recommended for water, salt solutions, mild acids, bases, sewage and natural gas. Optional: EPDM FINISH: Heavy coat of corrosion resistant shop coat primer. Optional Fusion Epoxy Coating available. 303, 304, 309: ANSI/AWWA C207 Class D Flange with ANSI 150 lb. drilling, ASME/ANSI B16.1 Class 125 Compatible Steel Ring Flange or equal
JCM 200 and 300 Series fittings are ANSI/NSF Standard 61, Annex G and ANSI/NSF Standard 372 Certified. JCM 200 and 300 Series fittings meet ANSI/AWWA Standard C219 as applicable.
JCM 230/231 Stainless Steel Stiffeners for HDPE Pipe For applications on High Density Polyethylene Pipe, using mechanical bolt on fittings to join or connection systems, JCM recommends the use of the JCM 230/231 Stainless Steel Pipe Stiffeners. JCM 230/231 Stiffeners provide:
• Corrosion Resistance • Rigid Reinforcement of Pipe Wall for Pipe Connections • Accurate Pipe I.D. Sizing maintains proper Outside Diameter • 1/8” Tapered Insert End provides for Easy Installation • 90° 1/8” Flared End Secures Stiffener to End of Pipe • Positive Reinforcement without interference
JCM HDPE Pipe Stiffeners are designed to support the interior wall of HDPE for critical pipe joining applications. Recommended for all pipe end connections utilizing mechanical bolt-on fittings, the JCM Pipe Stiffeners support the pipe’s end and controls the “necking down” reaction to the pressure applied during normal installation of fittings used in pipe joining applications. The JCM HDPE Pipe Stiffeners are formed of stainless steel, 304 or 316 material, to the actual inside pipe diameter provided by the customer. This accurate formation provides for ease of installation and maintains the proper outside diameter for a successful, trouble free application that provides long-term service. JCM Pipe Stiffeners are available for Steel Size and Ductile Iron Size HDPE in SDR11,13.5, 17, 21, 26, 32.5 JCM Pipe Stiffeners Material Specifications: ASTM A240 - TP 304 Stainless Steel or 316 Stainless Steel
Powered by FlippingBook