JCM Weld On Tapping Outlets Weld-on outlets & connections are dependable and economical with JCM Weld On Fittings. Outlets, partial sleeves and complete sleeves are readily available for steel pipe 6” and larger with size on size and reducing outlets. Outlets and partial sleeves are also available for tank and bulkhead use. Various configurations of this design are available. Featured below are the most popular. Available fabricated of carbon steel, 304 Stainless Steel and 316 Stainless Steel
416 Type 1: Weld On Outlet
416 Type 2:
Split Tee Three Piece Weld On Saddle
416 Type 3: Flanged Nozzle Weld On Outlet
416 Type 4: Hat Flange Weld On Outlet
417 Type 1: Split Tee Weld On Tapping Sleeve
MATERIAL SPECIFICATIONS
BODY : ASTM A-36 Steel or equal.
Other configurations available upon request.
Optional 304 or 316 Stainless Steel. FINISH : Heavy coat of corrosion resistant shop coat primer. Optional Fusion Epoxy Coating available. FLANGE: AWWA C207 Class D, ANSI 150 lb. Drilling, recessed for tapping valve MSS-SP60. Other Flanges Available Upon Request. Tapping Sleeves shall be ANSI/NSF Standard 61, Annex G and ANSI/AWWA 372 Certified. HOW TO ORDER - JCM WELD ON OUTLETS 1. Determine pipe O.D. and outlet size. Each sleeve is fabricated to the exact O.D. of the pipe. 2. Determine sleeve type required. For Standard Type 1 416 Weld On Outlet for steel pipe with 6.63 O.D. with 6” outlet, order: 416- 0663 x 6 Type1. Other configurations and designs available. Standard outlet flange is AWWA C207 Class D, ANSI 150lb Drilling, recessed for tapping valve MSS-SP60. Other flanges available upon request.
36
Powered by FlippingBook