JCM Engineered Products Manual 8 24 2020

JCM Fabricated Spools and Bypass Tees

JCM Fabricated Spools, Meter Test Spools and Tees are available in many lengths and configurations to meet specific installation requirements. Short laying lengths and precise dimensions make these fittings extremely desirable in vault applications. These fusion epoxy coated steel fittings eliminate stress cracks common to iron fittings yet provide excellent corrosion resistance for use in underground vaults.

JCM Fabricated Carbon Steel Spools - Typical Specification Bypass Tee and Test Spools shall be manufactured to AWWA C-200 and have machine tolerances on laying length, outlet and flange alignment. Fittings shall be fusion epoxy coated, minimum 12 mils on external surfaces, minimum 12 mils on internal, dry film thickness in accordance with AWWA C-213 Standard. Fabricated Spools Expansion Joint shall be ANSI/NSF Standard 61, Annex G and ANSI/AWWA 372 Certified. JCM Spools are available fabricated of 304 stainless steel or 316 stainless steel JCM Fabricated Spools - Material Specification FLANGES: AWWA C207 Class, D ANSI 150 lb. drilling. Optional Stainless Steel 304 or 316. Other flanges available upon request. BODY: Steel Pipe or Tubing. Optional Stainless Steel 304 or 316 FINISH: Fusion Applied Epoxy Coating (per ANSI/AWWA C-213). Other finishes available upon request.


Powered by