JCM 114 Fabricated Mechanical Joint Repair Sleeve
Repair cast iron bells, split or leaking coupling and weld joints, or straight runs of pipe without costly shutdown or disruption to critical service.
No Shutdown or Interruption of Critical Service - by implementing a split fabricated mechanical joint design, the JCM 114 prevents costly down time and service disruption.
True Mechanical Joint Design - industrial grade, fabricated steel body and heavyweight pusher glands prevent the warpage and distortion experienced by lightweight repair sleeves using the split steel coupling designs. JCM 114 meets design criteria in AWWA C110/111, ANSI 21.10/21.11 for tolerances, dimensions and configuration of the time proven mechanical joint seal. Custom Built For Specific Application - this versatile mechanical joint fitting is built to meet the specific requirements of special applications. Eliminates lost time due to field or factory modifications. JCM 114 sleeves are available for both limited space and full pipe section encapsulation. Strong and Lightweight - the 114 sleeves are ideal for installations where strength, weight and continued service are critical. The reduced weight of high strength steel aids in installation and handling as well as minimizing weight load on the pipe.
Typical Application: Repair
Temporary/Permanent Repair Pipe In Service Cracked/Broken Pipe Joints Splits Holes Failed MJ Joints, Fittings or Couplings
Available in Two Styles - the 114 MJ Split Repair Sleeve for use on straight runs of pipe and the 114 MJ Bell Repair Sleeve which is fabricated to accommodate the specific dimensions of the bell, collar or coupling to be repaired. Optional Materials - the fabrication process of the 114 construction allows for various material options for the finished product. The 114 is available in carbon steel with special coatings and fasteners, or is available fabricated of all stainless steel (304, 316). HOW TO ORDER
For pricing and engineering, the following information must be furnished: JCM 114 is available fabricated of 304 stainless steel or 316 stainless steel Available American Iron and Steel Compliant
JCM 114 Mechanical Joint Bell Repair Sleeve The following information must be furnished. Type of Pipe
JCM 114 Mechanical Joint Split Repair Sleeve The following information must be furnished. Type of Pipe
Spigot or Pipe Outside Diameter Largest Bell or Coupling Dimension Length Requirements Line Content Line Pressure Finish or Coating Requirements
Pipe Outside Diameter Length Requirements
Line Content Line Pressure Finish or Coating Requirements
4
Powered by FlippingBook